Registering Preset Receiver Memory Channels Into Memory Banks; Recalling Preset Receiver Memory Channel To Listen To The Weather Broadcast - Yaesu FT2DR Operating Instructions Manual

Convenient Preset Receiver Memory Channels

Registering Preset Receiver Memory Channels into Memory Banks

Your favorite preset receiver memory channels may be registered into a memory bank.
1
Rotate the DIAL to select the preset receiver memory channel to register into the
memory bank.
2
Touch [F MW] for over one second.
Remark To immediately cancel the registration, press
3
Rotate the DIAL to select a memory bank to register your favorite preset receiver
memory channel.
4
Touch [M.WRITE].
The preset receiver memory channel is registered to the memory bank, and the
frequency appears on the LCD.
Recalling Preset Receiver Memory Channel to Listen to the
Weather Broadcast
The frequencies (10 channels) used for the VHF Weather Broadcast Station are registered
in the dedicated preset receiver memory channels.
1
Press the
2
Touch [F MW].
3
Touch [P.RCVR].
Preset Receiver mode is activated.
4
Press the
5
Rotate the DIAL to select the desired channel.
Remarks • For the available Weather Broadcast channels, see the following table.
• To stop reception of the international VHF radio, touch [F MW] followed by [P.RCVR]].
Memory channel No.
1
2
3
4
5
66
key to set the A-band as the operating band.
key to select [WX CH].
WX Channel Frequency List
Frequency (MHz)
162.550
162.400
162.475
162.425
162.450
.
Memory channel No.
6
7
8
9
10
Frequency (MHz)
162.500
162.525
161.650
161.775
163.275