Setting The Dtmf Code; Calling Only A Specific Station (New Pager Function); Enabling No-Communication Squelch Function Pr Frequency Function; Adjusting The Squelch Level Sql Level Function - Yaesu FT2DR Operating Instructions Manual

Setting the DTMF Code

By selecting [5 DTMF SELECT], the maximum of 16 digit DTMF code can be registered
for a telephone number to make a call through the public telephone line from a phone
patch.
For details, see "Using the DTMF Function" on page 103.

Calling Only a Specific Station (New Pager Function)

When using transceivers with a group of friends, specifying individual personal codes
permits directing a call to a specific station by selecting [6 PAGER].
For details, see "Calling Only a Specific Station
Enabling No-communication Squelch Function PR FREQUENCY
Function
Set a no-communication squelch frequency in steps of 100 Hz within the range from 300
Hz to 3000 Hz.
1
Touch [7 PR FREQUENCY].
2
Rotate the DIAL to tune in to a no-communication squelch frequency.
Select a no-communication squelch frequency in steps of 100 Hz within the range
from 300 Hz to 3000 Hz.
Remark
The default setting: 1600 Hz

Adjusting the Squelch Level SQL LEVEL Function

Set the squelch level to mute the raspy noise heard when there is no signal.
1
Touch [8 SQL LEVEL].
2
Rotate the DIAL to adjust the squelch level from LEVEL 0 to LEVEL 15.
Remark
The default setting: LEVEL1
Set Mode: SIGNALING Menu Operations
New Pager Function" on page 116.
139