Assigning Name To Memory Bank - Yaesu FT2DR Operating Instructions Manual

Using Memory Bank

Assigning Name to Memory Bank

A name can be assigned to a memory bank using up to 16 characters.
The following types of characters can be entered:
• Alphabetic characters (uppercase and lowercase characters)
• Numbers
• Symbols
1
Press and hold the
The transceiver enters Set mode.
2
Touch [MEMORY].
3
Rotate the DIAL, then touch [2 BANK NAME].
4
Rotate the DIAL to select a memory bank.
Select the number of the memory bank to which you want to assign a name.
5
Press and hold the
6
Input a bank memory name (See "Entering Letters" on page 19).
7
Press .
The memory bank name is saved, and the transceiver exits from Set mode.
64
key for over one second.
key