Oce DFS10 Operator's Manual page 68

Condition
DFS10 displays a
message that Cover Tray
1 and Cover Tray 2
contain different cover
types.
Desired Cover Tray is
unlocked and cannot be
selected.
DFS10 displays a
message about required
spine width.
Binder displays a
message instructing you
to feed a set using an Océ
cover.
Books are bound on
wrong edge of copy sets.
Books not binding
properly (e.g., too many
sheets for cover size).
62
Causes
1&2 has been selected from
the Control Panel of the
DFS10, but the Cover Trays
contain different cover types.
The cover cassette in the
Cover Tray is empty.
The required spine width for
the current copy set is not the
same as the spine width for the
selected Cover Tray.
A non-Océ cover type is being
used.
The cover sensor cannot
detect the Océ cover because
the cover is deformed.
Auto feed:
The documents were placed
incorrectly into the Document
Feeder of the host machine.
Manual feed:
The copy sets were fed
incorrectly into the Manual
Feeder of the DFS10.
Wrong cover size may have
been loaded into the cover
cassette (i.e., the bar code on
the cassette and the contents
of the cassette reflect different
cover sizes). This could
happen if you manually load
covers into the cassette.
Suggested solutions
Load the appropriate cover
cassettes into both Cover
Trays or select Cover Tray 1
or Cover Tray 2.
Load a cassette containing
covers into the Cover Tray.
Load a cover cassette
containing the correct cover
spine width into the selected
Cover Tray.
Clear the jam as directed in
the "Locating and clearing a
jam" section of this chapter.
Load a cover cassette
containing Océ covers into
the selected Cover Tray or
insert a copy set with a Océ
cover into the Manual
Feeder.
Clear the jam as directed in
the "Locating and clearing a
jam" section of this chapter.
Straighten the cover spine.
Auto feed:
See the operator manual of
the host machine for correct
orientation of the documents.
Manual feed:
Insert copy sets into the
Manual Feeder as directed in
chapter 3, "Making the
books".
Load the correct cover size
into the cover cassette or
load a different cover
cassette.
Problem solving