Table of Contents
Advertisement
Item
#
7
8
9
10
12
US Name
New Job Button
Manual Start Button
Stop Button
Reset Button
Name/Symbol
This button enables you to
track the number of books
being bound for each job.
Press this button to begin
the book count for a new job.
Any copy sets already in
the DFS10 and in the process
of being bound will
be identified as part of the
current job.
The next copy set that enters
the DFS10 will become the first
book for the new job.
NOTE: After four minutes of
inactivity (i.e., no input to the
DFS10), the job counter will
clear automatically.
It will also clear when you
power off the DFS10.
Press this button to start the
binding process whenever
you use the Manual Feeder.
When binding multiple copy
sets, you do not need to press
this button for each set if you
feed the sets within 15 seconds
of each other.
Press this button to stop the
operation of the DFS10. When
you do so, the binding process
will halt and the Attention
Lamp, if enabled, will light.
Press in "Off-line status" : cycle
ready.
Press in "Error status": 1 time:
Fault code, 2 times: history.
Press this button to reset the
DFS10 and resume the binding
operation.
Getting to know the Océ DFS10
Description
Advertisement
Table of Contents
