Table of Contents
Advertisement
Making the books
Manual operation without using the Cover Trays
Use this procedure when the DFS10 is in off-line mode and
you wish to insert the covers manually. Manual insertion of
covers is helpful when you are binding just a few books and
neither Cover Tray contains the correct covers. It eliminates
the effort of loading the correct cassettes into a Cover Tray.
1. Select
(None) from the Cover Supply section on
the Control Panel of the DFS10.
2. Insert the copy set into the book cover according to the
page orientation, step a or step b.
a. For portrait (vertical) page orientation, insert the copy
set so that the top page of your copy set faces the front
of the cover and the cover spine is to the left of the
image on the pages (as the word Océ is shown in the
figure).
33
Advertisement
Table of Contents
