Oce DFS10 Operator's Manual page 62

56
Areas F5, F6, F7
To clear a jam in areas F5, F6 or F7, do the following:
1. Read the instructions in the Message Display.
2. Use the Mimic Display to locate the jam.
3. Open the Right Front Door.
WARNING: Be careful not to pull on the Book String Guides
when removing jammed books.
4. Follow the instructions on the jam clearance label(s) to
remove the book and any obstruction.
NOTE: Any books removed during this jam clearance
operation have completed the binding process. If they are
undamaged, store them with your other completed books.
WARNING: Close the Right Front door as soon as you clear
the jam. If you leave the door open too long, any books waiting
in the Binder Module area will overheat. This will result in
defective binding and warped books.
5. Close the Right Front Door.
6. Do one of the following:
a. If the Binder is in the on-line mode, proceed to step 7.
b. If the Binder is in the manual mode, insert the next
copy set or copy set with cover into the Manual Feeder
and press the Manual Start button. Ignore the
remaining steps in this procedure.
7. Read the instructions in the Message Display.
8. Follow the directions on the host machine User Interface
screen.
Problem solving