Table of Contents
Advertisement
Book overview
A book consists of one or more sheets, bound into a specially designed Océ cover. The covers
are available in a variety of spine widths, cover types and colors ranging from 1.5 mm (1/16
inch) to 13 mm (1/2 inch). The appropriate spine width for a book depends on the paper
weight and number of sheets being bound.
The number of sheets that can fit into a specified spine width varies according to the weight
of the paper. For 80 gsm or 20 lb, 24 lb Océ paper, refer to the Spine Width/Sheet Capacity
table in chapter 7, "Technical data".
If the DFS10 detects the use of a non-Océ cover, a "Please Feed Set Using an Océ Cover -
Press Reset to Continue" message will appear in the Message Display of the Control Panel
of the DFS10. The DFS10 will stop processing. You must perform a jam clearance to remove
the copy set and cover from the DFS10. See chapter 6, "Problem solving", for further
information about jam clearance.
The covers are contained in recyclable cardboard cassettes. Cassettes are packaged in cases
of three. Each cassette contains 150 covers.
The cassettes are loaded into the Cover Trays of the DFS10. Each cassette has a bar code that
the DFS10 reads to determine the cover type, color, and spine width. This is the information
that appears in the Cover Supply Contents Display of the Control Panel of the DFS10.
20
Making the books
Advertisement
Table of Contents
