Locating And Clearing A Jam - Oce DFS10 Operator's Manual

Locating and clearing a jam

52
This section describes how to determine when a jam occurs in
the DFS10, illustrates the location of the jam clearance labels
affixed to the DFS10, and outlines the procedures for clearing
jams.
Determining when a jam occurs in the DFS10
When the DFS10 experiences a jam, the following events will
occur:
• The Attention Lamp, if enabled, will flash every 15
seconds.
• The Sound Tone, if enabled, will beep every 15 seconds.
• A red light will light on the Mimic Display at the location
of the jam.
• The Message Display will provide information about the
jam.
Jam locator illustration
Labels appear throughout the DFS10 at the points where jams
can occur. These labels illustrate how to resolve the problem.
The illustration below shows the location of the various labels.
Problem solving