Placing Your Océ Dfs10; Service Space Requirements - Oce DFS10 Operator's Manual

Placing your Océ DFS10
For reliable DFS10 operation and book quality, Océ recommends the guidelines below.
• Place the DFS10 in a well-ventilated room.
• Ensure that the room temperature and relative humidity are within the following ranges:
– Temperature: 17° C (63° F) to 32° C (90° F)
– Relative humidity: 15% to 85%
• Place the DFS10 on a flat, level surface. Ensure that the DFS10 is aligned to your Océ
copier/printer for optimum performance.
• Avoid locations that subject the DFS10 to the following conditions:
– Direct sunlight which may make the screen difficult to see
– Extreme changes in temperature or humidity
After selecting a location that meets the preceding guidelines, ensure that the DFS10 has
sufficient space around it for service, if required. The diagrams below illustrate the service
space requirements.

Service space requirements

Introduction 5