Oce DFS10 Operator's Manual page 37

Making the books
3. Insert the copy set into the Manual Feeder according to the
page orientation, step a or step b.
a. For portrait (vertical) page orientation, insert the copy
set so that the top page of your copy set faces the right
side of the DFS10 and the top of the pages face the
front of the DFS10 (as the word Océ is shown in the
figure).
NOTE: Follow the orientation labels on the Manual
Feeder area of the DFS10
b. For landscape (horizontal) page orientation, insert the
copy set so that top page of your copy set faces the
right side of the DFS10 and the top of the pages face
downward into the Manual Feeder (as the word Océ is
shown in the figure).
NOTE: Follow the orientation labels on the Manual
Feeder area of the DFS10.
4. Press the Manual Start button on the Control Panel of the
DFS10.
NOTE: If you are binding more than one book, you can
streamline the process by feeding the copy sets within 15
seconds of each other. Doing so eliminates the need to
press the Manual Start button for each book.
31