Replacing The Cpu Fan Assembly; Figure 8-24 Removing And Replacing The Cpu Fan Assembly - Sun Microsystems Ultra 60 Service Manual

FIGURE 8-24
8.9.2

Replacing the CPU Fan Assembly

Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Connect the CPU fan assembly as follows (
a. Using the metal handle, insert the fan assembly into the shroud assembly,
firmly compressing the foam until the catch snap activates into the square
opening.
b. Route the CPU fan assembly power cable through the five cable clips. Connect
the CPU fan assembly power cable to the motherboard connector J2601.
Snap catch
Shroud assembly
Removing and Replacing the CPU Fan Assembly
Metal handle
Power cable
):
FIGURE 8-24
Chapter 8 Major Subassemblies 8-37