FIGURE 10-6
10.6.2
Replacing the Audio Card
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Replace the audio module as follows (
a. Position the audio module into the chassis.
b. Lower the audio module connector so that it touches its associated card slot on
the motherboard.
10-18
Sun Ultra 60 Service Manual • August 2001
Screw
Audio card
Removing and Replacing the Audio Card
):
FIGURE 10-6