Figure 10-3 Removing And Replacing A Pci Card - Sun Microsystems Ultra 60 Service Manual

4. Attach the wrist strap.
See Section 7.2, "Attaching the Wrist Strap" on page 7-3.
5. Remove the PCI card as follows (
a. Using a Phillips-head screwdriver, remove the screw securing the PCI card
bracket tab to the system unit chassis (not illustrated).
Caution – Avoid damaging the connector by not applying force to one end or one
side of the board.
b. At the two upper corners of the PCI card, pull the card straight up from the slot.
c. Remove the PCI card.
6. Place the PCI card on an antistatic mat.
FIGURE 10-3
10-8 Sun Ultra 60 Service Manual • August 2001
Removing and Replacing a PCI Card
):
FIGURE 10-3
PCI card