Replacing The Cpu Module - Sun Microsystems Ultra 60 Service Manual

10.1.3

Replacing the CPU Module

Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Replace the CPU module as follows (
a. On the antistatic mat, hold the CPU module in an upright position with the
plastic surface facing you.
b. Move the levers on the CPU module to the 135-degree position.
10-4 Sun Ultra 60 Service Manual • August 2001
):
FIGURE 10-1