Screw
UPA graphics card
Removing and Replacing a UPA Graphics Card
FIGURE 10-4
10.4.2
Replacing the UPA Graphics Card
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Replace the UPA graphics card as follows (
):
FIGURE 10-4
a. Position the UPA graphics card into the chassis.
b. Guide the UPA graphics card back panel into the chassis backpanel.
Chapter 10 Motherboard and Component Replacement
10-11