Chassis Foot; Removing The Foot; Figure 8-7 Removing And Replacing The Chassis Foot - Sun Microsystems Ultra 60 Service Manual

8.6

Chassis Foot

To remove and replace a chassis foot, proceed as follows.
8.6.1

Removing the Foot

1. Power off the system unit.
See Section 6.2, "Powering Off the System Unit" on page 6-3.
2. Lay the system unit in the service position.
3. Using a number 2 Phillips-head screwdriver, loosen the screw securing the foot to
the chassis (
4. Remove the foot.
FIGURE 8-7
8-16 Sun Ultra 60 Service Manual • August 2001
).
FIGURE 8-7
Removing and Replacing the Chassis Foot
Foot (4)
Screw (4)