Sun Microsystems Ultra 60 Service Manual page 138
Hide thumbs
Also See for Ultra 60:
- Service manual (240 pages) ,
- Manual (66 pages) ,
- Upgrade manual (28 pages)
Table of Contents
Advertisement
a. Lower the locking lever to lock the shroud assembly to the motherboard.
b. Using a number 2 Phillips-head screwdriver, tighten the captive screws
securing the shroud assembly to the motherboard.
c. Connect the power cable to the motherboard connector J2601.
3. Replace the CPU modules.
See Section 10.1.3, "Replacing the CPU Module" on page 10-4.
4. Connect the AC power cord.
5. Detach the wrist strap.
6. Replace the side access cover.
See Section 7.3, "Replacing the Side Access Cover" on page 7-4.
7. Power on the system unit.
See Section 6.1, "Powering On the System Unit" on page 6-2.
8-40
Sun Ultra 60 Service Manual • August 2001
Advertisement
Table of Contents
