Removing The Cd-Rom Drive Or Any X-Option Tape Drive; Figure 9-2 Removing And Replacing A Rma Drive (Part 1 Of 2) - Sun Microsystems Ultra 60 Service Manual

RMA
Diskette drive
Front bezel
FIGURE 9-2
9.2.2 Removing the CD-ROM Drive or Any X-Option
Tape Drive
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Position the RMA on a flat surface so that the CD-ROM drive or tape drive is flat
(
FIGURE 9-3
9-6 Sun Ultra 60 Service Manual • August 2001
CD-ROM drive
(or 4-mm or 8-mm tape drive)
Captive screw (2)
Removing and Replacing a RMA Drive (Part 1 of 2)
).