Hard drive handle
Handle latch
Hard drive
Drive bay
Removing and Replacing a Hard Drive
FIGURE 9-1
9.1.2
Replacing a Hard Drive
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Replace the hard drive as follows (
):
FIGURE 9-1
a. Holding the drive handle, insert the hard drive into the drive bay.
b. Push the front of the hard drive to connect it to the SCSI bus.
Chapter 9 Storage Devices
9-3