Removing The Side Access Cover; Figure 7-1 Lock Block Location - Sun Microsystems Ultra 60 Service Manual

7.1

Removing the Side Access Cover

1. Power off the system unit.
See Section 6.2, "Powering Off the System Unit" on page 6-3.
2. Disconnect the lock block (
FIGURE 7-1
3. Remove the side access cover as follows (
a. Lay the system in the service position.
b. Grasp the side panel and pull it toward the back of the system.
c. Disengage the side access cover from the chassis hooks.
d. Grasping the access cover sides, lift the side access cover upward and remove.
7-2 Sun Ultra 60 Service Manual • August 2001
FIGURE 7-1
Lock block
Lock Block Location
).
):
FIGURE 7-2