Test Alias Name, Device Path, -All - Sun Microsystems Ultra 60 Service Manual

CODE EXAMPLE 4-5
Target 6
Unit 0
XM5701TASUN12XCD0997
{0} ok probe-scsi-all
/pci@1f,4000/scsi@3,1
/pci@1f,4000/scsi@3
Target 0
Unit 0
Target 6
Unit 0
XM5701TASUN12XCD0997
4.6.4

test alias name, device path, -all

The test command, combined with a device alias or device path, enables a device
self-test program. If a device has no self-test program, the message:
No selftest method for device name is displayed. To enable the
self-test program for a device, type the test command followed by the device alias
or device path name.
CODE EXAMPLE 4-6
selections, a description of the selection, and preparation.
Note – The diskette drive is selected as the test alias name example.
CODE EXAMPLE 4-6
ok test floppy
Testing floppy disk system.
drive.
Test succeeded.
probe-scsi-all Output Message (Continued)
Removable Read Only device
Disk QUANTUM VK4550J
Removable Read Only device
identifies the test output message.
test Output Message
TOSHIBA
SUN4.2G8600
TOSHIBA
TABLE 4-6
A formatted disk should be in the
Chapter 4 Troubleshooting Procedures
lists test alias name
4-11