Figure 9-8 Removing The Cd-Rom Filler Panel - Sun Microsystems SPARCstation 4 110 Service Manual

Removing the CD-ROM Filler Panel
FIGURE 9-8
4. Remove the diskette drive filler panel (if present) in the same way as you remove
the CD-ROM filler panel, as shown in
push the diskette drive toward the center of the chassis to disengage it.
Do not push on the drive's front bezel. You may need to use a screwdriver for
leverage. Use the screwdriver to push on the drive grommets as shown in
Push tabs inward
and pull panel out.
. If the diskette drive is installed,
FIGURE 9-8
Chapter 9
.
FIGURE 9-9
Storage Devices 9-9