Netware 5.1 Post-Installation Procedure - Toshiba Magnia 3200 User Manual

Server Setup Tool
Selecting the Onboard Network Adapter driver
When the installer detects the network adapter, the following screen appears. Select
Modify to replace the driver.
The following drivers were detected for this server. Add, change,
or delete device drivers as needed.
Device types
Storage Devices:
Network boards:
NetWare loadable modules
1 Move the cursor to "Network boards" using the arrow keys, and press the Enter key.
2 When the "List of network drivers currently selected" appears, delete the drivers with
the <Del> key.
3 Insert the Intel LAN NetWare Driver created with Toshiba Server Setup Tool in the
floppy disk drive.
4 Select Add an unlisted driver <Ins> by pressing the Insert key.
5 Press the Enter key to copy the drivers.
When the drivers are detected, they are added to the "List of network drivers
currently selected."
| | CE100B.LAN | | Intel(R)PRO PCI Adapter(CHSM Spec 1.11)| |
| | E100B.LAN
6 Select "E100B.LAN."
Continue the installation by following the on-screen instructions.

NetWare 5.1 Post-Installation Procedure

This section reviews the procedure after installing NetWare 5.1
Restoring the original boot sequence
Use the BIOS setup utility to move the CD-ROM drive lower in the boot sequence. Press
<-> to move "CD-ROM Drive" to a lower order in the boot sequence than "+Hard Drive".
Driver names
IDEATA, IDECD
CE100B
(optional)
options
_Continue
_Modify
| | Intel(R)PRO PCI Adapter(AHSM Spec 3.31)| |
171
Starting SST