Table of Contents
Advertisement
Server Setup Tool
TCP/IP Protocol Setting
If you have specified TCP/IP as the network communication protocol on the Network
Protocol Setting screen, the TCP/IP Protocol Setting screen appears. The TCP/IP
Protocol Setting screen allows you to specify an IP Address, Subnet Mask and Default
Gateway Address for the on-board LAN Controller.
TCP/IP Protocol Setting screen
1
Enter an IP Address.
2
Enter a Subnet Mask.
3
Enter the Default Gateway Address.
To have the domain server automatically assign the IP addresses, Subnet Masks and
Default Gateway to your computer, select Assign an IP Address from DHCP
Server.
4
After making your entries, click Next.
145
Starting SST
Advertisement
Table of Contents
