Table of Contents
Advertisement
Management Software
Item
Error Count
Smart Status
Logical Drives
Capacity
Transfer Mode
Serial Number
Array Name
SCSI RAID Status screen
If you click SCSI RAID Status for an Agent where SCSI RAID is in use, the following
screen displays.
Item
Adapter
Index
Logical Drives
Firmware Version
BIOS Version
Dram Size in MB
Rebuild Rate In
Percent
Flush Interval
Max Concurrent
Cmds
Displays the error count.
Indicates whether S.M.A.R.T. error support is enabled.
Displays the logical drive letters.
Displays the physical disk capacity.
Displays the Transfer Mode.
Displays the serial number.
Displays the array name.
Displays adapter information.
Displays the adapter number.
Displays the number of logical drives.
Displays the firmware version.
Displays the adapter BIOS version.
Displays the amount of DRAM installed on the adapter.
Displays the rebuild rate.
Displays the Internal Cache Flush Interval of the logical drive
in WriteBack mode.
Displays the maximum number of concurrent commands
supported.
Explanation
Explanation
198
Using HarnessEye/web
Advertisement
Table of Contents
