Table of Contents
Advertisement
Connecting Hardware Devices
3
Position the expansion slot cover in the slot, then lower the card support to hold the
cover in place.
Installing the expansion slot cover
4
Reinstall the access panel, reconnect all signal and power cables, then turn on the
server. For instructions, read steps 7 through 10 in
53.
Installing a RAID controller
The Toshiba Magnia 3200 server supports two types of RAID controllers—the AMI
Express 500
same system.
WARNING: When replacing the cache memory backup battery, be sure to install it
properly. Failure to install the battery properly can cause it to explode. For
instructions, refer to
Dispose of the spent battery as required by local ordinances or regulations.
Installing the Express 500 and AF200C RAID controllers
1
If the server is in operation, shut it down. Then remove the access panel. For
detailed instructions, read steps 1 through 5 in
CAUTION: Installing the RAID controller while the power is on may damage both
the server and the RAID controller.
™
, and the Toshiba AF200C
Replacing the internal battery
Maintenance overview
™
. You cannot install both controller types in the
on page 74.
Maintenance overview
93
Expansion cards
on page
on page 53.
Advertisement
Table of Contents
