Changing The Boot Sequence - Toshiba Magnia 3200 User Manual

Server Setup Tool
Start the Toshiba Server Setup Tool, select Utilities and then Creating FDs. Copy the
following drivers to the floppy disks:
Symbios NetWare Driver
Intel LAN NetWare Driver

Changing the boot sequence

Before starting the driver installation procedure, use the BIOS setup utility to change the
CD-ROM drive's order in the boot sequence, enabling the CD-ROM to boot the OS.
1 Press F2 in the BIOS screen (displayed immediately after power-ON) to start the
BIOS setup utility, then select CD-ROM Drive from the boot menu.
+Removable Devices
+Hard Drive
CD-ROM Drive
SYM53C8XX Boot Support
2 Press <+> to move up the CD-ROM drive to a higher order in the boot sequence
than "+Hard Drive".
+Removable Devices
CD-ROM Drive
+Hard Drive
SYM53C8XX Boot Support
Selecting the driver when installing NetWare 5.1
When installation of NetWare 5.1 starts, the installer detects the SCSI controller and the
network adapter, and automatically assigns drivers contained on the NetWare CD-ROM.
However, use the driver that comes with this system instead of these drivers.
Selecting the Onboard SCSI Controller driver
The installer detects the SCSI controller and the following menu appears. Select Modify,
and replace the driver using the following procedure:
169
Starting SST