Table of Contents
Advertisement
Connecting Hardware Devices
Installing an intake fan
1
If the server is in operation, shut it down. Then remove the access panel. For
detailed instructions, read steps 1 through 5 in
DANGER: Installing a cooling fan while the server is on could result in electric
shock and shorten the service life of both the fan and the server.
2
If installing a redundant fan, remove the screw securing the cover plate to the fan
bay, then remove the cover plate (there is no cover plate when installing a
replacement fan).
Removing the fan cover plate (redundant fan only)
3
Position the intake fan module in the fan bay and replace the screw to hold it in
position.
Maintenance overview
58
Cooling fans
on page 53.
Advertisement
Table of Contents
