Meeting Conference; Meeting Initial Configuration; Meeting Server Name Setup; Meeting Ip Address Change Procedure - Toshiba IP edge EP Installation Manual

MEETING CONFERENCE

MEETING CONFERENCE
MEETING INITIAL
CONFIGURATION
Meeting Server Name
Setup
MEETING IP Address
Change Procedure
Installation Manual August, 2011
1. Login to Enterprise Manager.
2. Select Maintenance > System Maintenance > Hardware
Monitoring.
3. Select the BMC Network Adapter tab.
4. Set the Address Source from the pull-down list. If you selected Static
assign the IP address, Subnet Mask and Default Gateway. If you
select DHCP no other entry is needed.
5. Click on the Save icon.
6. Connect the IPMI to the LAN or WAN.
Important! The IPMI connection must be able to route to the IPedge
LAN connection.
WARNING! This connection allows access to the Linux operating
system of the IPedge server. Toshiba recommends that
you change this user name and password. Record and
safely store this information. If lost this password can
not be recovered.
Every IPedge server with Meeting (Meet Me Conference) licensed must
perform the following procedures.
Setup the Meeting server names.
• If Meeting will be licensed on this IPedge server add the following
Meeting server names. Select Host Addresses, then add:
admin.SERVER_NAME (enter the name of your IPedge server).prv
webconf.SERVER_NAME (enter the name of your IPedge server).prv
The Meeting server software is pre-installed on the IPedge server when
shipped. The Meeting server IP address must be set and the server
started as part of the IPedge system installation.
1. Login in to Enterprise Manager, select Applications > Webmin >
Network Configuration > Host Addresses.
2. Select Add new host address enter the IP address of the IPedge
server then add:
admin.SERVER_NAME (enter the name of your IPedge server).prv
webconf.SERVER_NAME (enter the name of your IPedge server).prv
1. In to Enterprise Manager, select Applications > Meeting > IPedge.
2. In the Welcome Screen, select System Configuration the screen
below will display. Enter the following:
System Name - The Meeting service name
Server Name - The meeting admin server name. This is the name
registered in the DNS server.
Dial in Number - The pilot number of the voice conference station

Meeting Server Name Setup

4-15