Table of Contents
Advertisement
Connecting Hardware Devices
4
Insert the expansion card in the slot, then lower the card support to hold the
expansion card in place.
Inserting the expansion card
5
Reinstall the access panel, reconnect all signal and power cables, then turn on the
server. For instructions, read steps 7 through 10 in
53.
Removing expansion cards
1
If the server is in operation, shut it down. Then remove the access panel. For
detailed instructions, read steps 1 through 5 in
CAUTION: Removing an expansion card while the power is on may damage the
server and the expansion card.
2
Lift the card support that holds the PCI expansion card in place, then remove the
expansion card from the slot.
Removing the PCI expansion card
Maintenance overview
Maintenance overview
92
Expansion cards
on page
on page 53.
Advertisement
Table of Contents
