Table of Contents
Advertisement
Connecting Hardware Devices
Installing memory modules
When upgrading system memory, place the first memory module in the lowest numbered
memory slot—slot 1 through slot 4. If the memory modules are of different capacities,
place them in order of increasing capacity. Install the memory module with the smallest
capacity in slot 1.
Memory slots
1
If the server is in operation, shut it down, then remove the access panel. For detailed
instructions, read steps 1 through 5 in
WARNING: Never perform disassembly procedures that are not described in this
manual. Failure to observe this precaution could result in electric shock, cause a
system fault, or void your warranty.
Never install or remove memory modules immediately after turning off the server.
To avoid burn injuries, wait for the heat around the memory modules to dissipate.
CAUTION: Installing a memory module while the server is on could cause damage
to the server or the memory module.
Memory modules can be seriously damaged by static electricity. Wear a wrist or
heel ground cable to discharge static electricity carried on your body. If such
equipment is not available, touch a grounded metal object to discharge static
electricity before working with sensitive electronic components.
Memory slot 1
Memory slot 2
Memory slot 3
Memory slot 4
Maintenance overview
Memory modules
on page 53.
67
Advertisement
Table of Contents
