Chapter 1: Getting Started; What Is The Magnia Sg20; Quick Start Procedure - Toshiba Magnia SG20 User Manual

Chapter 1
Getting Started
This chapter provides a written quick start procedure. In addition to explaining how to
connect the Magnia SG20 and install the software, it introduces the unit's features, and
identifies each component.

What is the Magnia SG20?

The Magnia SG20 is a device that allows you to quickly connect computers to form a
single system through a built-in wired or wireless network. It provides all the basic
networking capability you need to support small groups, a home office, or small
business, including: file sharing, printer sharing, Internet gateway, and local intranet.
The Magnia SG20 is:
❖
Simple to use and setup
❖
Dedicated to a limited, but specific purpose
❖
Extremely reliable

Quick start procedure

If you have already planned your network and are an experienced computer user, this
section, along with the Quick Start card, should provide all the information you need.
Otherwise, read
and begin the installation process with
The basic steps for installing the Magnia SG20 are:
1 Unpack all components.
2 Assemble the additional components you will need: network cables or wireless
network card for client computers, printer cable (if you're connecting a network
printer), and telephone cable or Ethernet
3 Locate and identify all ports.
For more information, see
Planning your network
Finding your way around
on page 63 before installing the Magnia SG20,
Unpacking the Magnia SG20
®
cable (for connecting to the Internet).
on page 24.
22
on page 23.