Table of Contents
Advertisement
Getting Started
Turning on the server
TECHNICAL NOTE: Always allow at least 10 seconds to elapse between turning
the server off and turning it back on again. If the server is turned on before 10
seconds have elapsed, it may malfunction.
1
Check that all the peripheral devices, such as the monitor, keyboard, and mouse, are
properly connected to the server.
2
Check that all power cables are connected to grounded AC outlets or an
uninterruptible power supply (UPS).
3
Turn on the monitor.
4
If you have an EPS-R model server, set the AC switch on the back of the server to
On.
Turning on the AC switch
5
Press the power button.
The power indicator (
Using Wake-On-LAN
The Toshiba Magnia 3200 server has Wake-On-LAN functionality. This feature allows a
remote client computer to start the server by transmitting a server startup packet to the
server network interface card. On EPS-R models, the AC switch must be On.
) lights green.
®
44
Turning on the server
Advertisement
Table of Contents
