Connect The Power Cord - Pitney Bowes DA300 Operating Manual

Setup
Plugging the
DA300 In
Turning the
DA300 On
2-12

6. Connect the Power Cord

1. Connect the power cord to the printer at the interface
panel, shown below.
Power Switch
2. Plug the power cord into a grounded outlet. Please review
the safety information on pages 2-5 and 2-6.
Once you've connected the cable, press the printer's power switch
to the "|" (ON) position. The switch is located next to the power
cord receptacle.
When you turn the printer on:
•
The LCD menu displays that the printer is initializing
and automatically displays "ON LINE".
•
The print head carriage moves to the right and parks in
the maintenance station.
Power Receptacle