Connecting The Power Cord - Pitney Bowes J640 Operator's Handbook Manual

J640 Operator's Handbook
Connecting the Power Cord ––––––––––––––––––––––––––––––––––
Before you plug or unplug the power cord, turn the printer off.
To connect the power cord:
1. Turn the printer off.
2. Turn the printer as shown.
3. Insert the power cord into the socket as shown below.
4. Plug the other end of the power cord into a grounded
electrical outlet of the correct voltage.
WARNING: The power supply cord is intended to serve as the
1-2
(I) indicates on and (O) indicates off.
On/Off
Switch
Socket
disconnect device. The socket-outlet shall be
near the equipment and shall be easily accessible.
Power Cord