Important Safety Notes - Pitney Bowes DA300 Operating Manual

Important
Safety Notes
In some countries the DA300 is supplied with a moulded mains
lead and plug. In other countries, or if the supplied lead is not
used, the following information applies:
1. An approved mains lead for the country concerned must
be used.
2. As the colours of the wires in the mains lead of this
equipment may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
- The wire which is coloured green and yellow must be
connected to the terminal in the plug which is marked
with the letter "E" or by the earth symbol
coloured green or green and yellow.
- The wire which is coloured blue must be connected to
the terminal which is marked with the letter "N" or
coloured black.
- The wire which is coloured brown must be connected to
the terminal which is marked with the letter "L" or
coloured red.
3. The wires in the supplied mains lead are coloured in
accordance with the following code:
Green and Yellow
Blue
Brown
THE DA300 MUST BE EARTHED
The power cord socket outlet is the primary means of discon-
necting the machine from the AC power. The socket outlet
should be near to the equipment and should be easily accessible.
- Earth
- Neutral
- Live
WARNING:
Setup
or
2-5