Connect The Power Cord - Pitney Bowes W660 Operator's Manual

2 • Setting Up the W660/W680 Printer
Connecting to
Power
Turning On the
W660/W680
2-12

5. Connect the Power Cord

1. Connect the female end of the power cord to the power
receptacle in the interface panel. Refer to the figure on
page 2-10.
2. Plug the male end of the power cord into a grounded
outlet. Please review the safety information on pages
2-9 and 2-10.
Once you've connected the cable, press the printer's power switch
to the "|" (ON) position. The switch is located next to the power
cord receptacle.
When you turn the printer on:
• The LCD menu shows the "STARTUP" and "INITIALIZ-
ING" screens.
• After the print head carriage moves to the right and
parks in the maintenance station, the LCD shows the
"ON LINE" screen.
Pitney Bowes W660/W680 Operator Guide