Network Status - Interlogix TruVision 21 User Manual

Chapter 11: Network settings
Figure 28: UPnP auto configuration screen
To enable UPnP:
1. Connect the recorder to the router.
Note: The router must support UPnP and this option must be enabled.
2. From the menu toolbar, click
3. Check the Enable UPnP
4. From Mapped Type,
If Manual is selected, enter the external ports and IP addresses required. Click the
Edit icon to change the values.
5. Click Apply to save the settings and click

Network status

You can easily check network traffic in order to obtain information about the recorder
such as its linking status, MAC address, MTU, sending/receiving rate, and NIC type.
The Network Detection window shows the network traffic between the recorder and
your local network. However, the traffic between the plug and play cameras and the
NVR 21S is not shown.
You can also check the network connection status by testing its delay and packet loss.
80
Network Settings
box.
select Auto or Manual.
> UPnP.
Exit to return to live view.
TruVision NVR 21 (SP) User Manual