Interlogix TruVision 21 User Manual page 62

Chapter 10: Camera setup
Table 11: Description of the IP camera window
Option
1. IP camera list
2. Sync Password
3. Manual Add
4. Device Search/Add
5. Upgrade
6. Delete
7. Refresh
To automatically add an IP camera:
1. From the menu toolbar, click
2. Click Device Search/Add
recorder LAN.
Note: If cameras still have default settings, they might have the same IP addresses.
This creates an IP conflict. Use the Edit button to assign a different IP address to
each camera. Before adding the IP camera to the recorder, use the Edit button to
assign a different IP address to each camera. Ensure that for each camera to
successfully connect the cameras.
3. Check the boxes of the cameras that you want to add to the recorder.
4. Click Add to add the selected cameras to the list of devices in the recorder. Click
Done when complete in order to return to the main window.
The cameras are added to the end of the list of devices.
5. To test if a camera connection is operational, select the desired camera from the list
of devices connected to the recorder and click Live. A pop-up window should
appear showing the camera's live view.
To manually add an IP camera:
1. From the menu toolbar, click
2. Click Manual Add. In the pop-up window, enter the camera details such as the IP
camera address/domain, protocol, management port, user name, and password.
Click OK.
The camera is added to the end of the list of devices.
56
Description
This shows the list of IP cameras added to the recorder. The camera
information shown is: Camera No., Status, PoE port, Edit, Advanced Set,
Live View, Camera Name, IP Camera Address, Manage Port, Protocol,
Device Model, Serial Number, and Firmware.
Sets all connected TruVision IP cameras to the same admin password as
the recorder.
Add a camera manually to the recorder by entering its IP address and other
required information.
Search the network for available TruVision or other natively supported IP
cameras. Add an IP camera to the recorder system.
Upgrade IP camera software. Insert USB flash drive in the recorder and
select the upgrade file. The camera will automatically reboot once the
software is upgraded.
Delete the selected IP camera from the list.
Update the information displayed on a camera in the recorder device list.
Camera Setup
to search for any supported IP cameras located in the
Camera Setup
> IP Camera Status.
> IP Camera Status.
TruVision NVR 21 (SP) User Manual