Ptz Presets And Tours - Interlogix TruVision 21 User Manual

Chapter 10: Camera setup

PTZ presets and tours

Presets are previously defined locations of a PTZ dome camera. It allows you to quickly
move the PTZ dome camera to a desired position. They are configured and modified
from the Camera Setup > PTZ Presets/Tours window (see Figure 26 below).
Tours are series of presets. Shadow tours allow you to record the manual movement of
a PTZ and follow the same tour at a later date.
Note: The PTZ dome camera used must be able to support a preset command.
Figure 26: PTZ configuration window
Table 13: Description of the PTZ configuration window
Name
1. Save preset
2. Call preset
3. Shadow tour toolbar
4. Preset tour toolbar
68
Description
Saves preset.
Calls up pre-existing preset.
Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Deletes the selected shadow tour.
Adds a step to a selected preset tour.
Starts the selected preset tour.
Stops the selected preset tour.
Deletes all the preset tour steps.
Scroll up the list.
TruVision NVR 21 (SP) User Manual