Chapter 18: Using the web browser
Remote configuration
Remote configuration includes settings related to the recorder itself. Many of the
settings covered in remote configuration are also available in the local on screen
display.
Figure 41: Remote browser configuration window (System Information window shown)
Table 18: Description of remote configuration menus
Menu
Function
Camera Setup
Camera Recording
Settings
Snapshots
Camera OSD
Motion Detection
Privacy Mask
Camera Tamper
Restricted Access
Camera
VCA
PTZ Preset/Tours
Network Settings
Network Settings
PPPoE
136
Description
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, audio recording,
and pre and post event times.
Define the image quality of snapshots. See "Snapshots" on
page 61 for further information.
Define which information is displayed on-screen. See
"Camera OSD" on page 61 for further information.
Define motion detection parameters. See "Motion detection"
on page 63 for more information.
Define the on-screen privacy mask areas. See "Privacy
mask" on page 64 for more information.
Define the video tampering detection settings. See "Camera
tamper" on page 65 for more information.
Define the cameras whose images cannot be displayed by
those not logged in. See "Restricted access camera" on
page 66 for more information.
You can define an area on screen to enable a VCA alarm.
Define and select PTZ Presets and Tours.SD
Define the general network settings. See "Network settings"
on page 72 for more information.
Define the PPPoE settings. See "PPPoE settings" on page
74 for more information.
TruVision NVR 21 (SP) User Manual