Motion Detection - Interlogix TruVision 21 User Manual

Click the Default
4. Click Apply to save the settings and then click

Motion detection

The motion detection menu allows you to enable or disable motion detection for
each camera, as well as create motion grids, set the sensitivity of the motion
detection and link motion detection to a specific action. To set up motion
detection:
1. From the menu toolbar, click
Areas covered by the red grid are sensitive to motion detection.
2. Select the camera to detect motion. Each camera must be set up individually.
3. Check Enable Motion
4. Select the areas on-screen to be sensitive to motion.
Click and drag the mouse cursor across the window to deselect areas sensitive to
motion detection.
Click Full Screen
5. Set the sensitivity level.
Drag the Sensitivity scroll bar to the desired sensitivity level. Default is 3.
6. Specify the target size.
In the Target Size option, specify how many grid squares must be activated before
motion is detected. Enter a value between 0 and 255 squares. Default is 1 square.
TruVision NVR 21 (SP) User Manual
button to return image setting values to the default position.
Camera Setup
Detection. If this is not enabled, motion will not be recorded.
to activate the whole screen or
Chapter 10: Camera setup
Exit to return to live view.
> Motion.
Clear to clear the screen.
63