Camera Setup; Ip Camera Status - Interlogix TruVision 21 User Manual
Hide thumbs
Also See for TruVision 21:
- User manual (182 pages) ,
- Quick start manual (65 pages) ,
- User manual (176 pages)
Table of Contents
Advertisement
Chapter 10
Camera setup
Use the Camera Setup menu to configure IP cameras. You can also configure the
camera status, OSD, snapshots, recording settings, image settings, PoE setup, motion
detection, privacy masking, camera tampering, restrict access, PTZ configurations and
VCA settings.
Note: Not all settings are available for IP cameras. For advanced IP camera settings,
please consult the IP camera web browser interface.
Supported IP cameras
The NVR supports TruVision and UltraView IP cameras as well as TVE encoders. It
supports a wide range of third party IP cameras through compliancy with the Onvif and
PSIA standards for open camera communication.
IP camera status
The IP camera status menu allows you to add, edit and remove cameras to the
recorder, as well as update the cameras' firmware or change its admin passwords.
Figure 23: IP camera window
TruVision NVR 21 (SP) User Manual
55
Advertisement
Table of Contents
