Interlogix TruVision 21 User Manual page 87

To check network traffic:
1. From the menu toolbar, click
appears. The information displayed is refreshed once a second.
To check network delay and packet loss:
1. From the menu toolbar, click
2. Under the section "Network Delay, Packet Loss Test", select the NIC to use and
enter the destination address. Click Test.
The test result appears in a pop-up window.
3. If you need to check the current network parameters, click the
get an overview. The current values for NIC type, DHCP, IPv4 address, IPv4 subnet
mask, IPv4 default gateway are shown as well as the preferred DNS server and
alternate DNS server if used.
The NIC Type and
changes made and then click
4. Click Exit to return to live view.
To check network status:
1. When all the network parameters have been set, click the
that all parameters are operating correctly.
TruVision NVR 21 (SP) User Manual
Network Settings
Network Settings
Enable DHCP options can be changed. Click
OK to return to the main window.
Chapter 11: Network settings
> Net Detect. The Traffic window
> Net Detect.
Network
Apply
Status button to confirm
button to
to save any
81