Chapter 14: Device management
To restore parameters to default factory settings:
1. From the menu toolbar, click
Note: Only the administrator can restore the default settings.
2. To restore all parameters to default factory settings:
Click the
Default
confirm that you want to restore all parameters to default.
Or
To restore all parameters, except network settings, to default factory settings:
Click the
Restore
confirm that you want to restore all parameters except network settings to default.
3. Click
OK
to confirm you want to restore default settings.
Upgrade system firmware
The firmware on the recorder can be updated using three methods:
Via a USB device
Via the recorder web browser
Using TruVision Navigator. For further information, refer to the TruVision Navigator
user manual.
The firmware upgrade file is labeled TVN21.dav.
To update the system firmware using a USB device:
1. Download the latest firmware from our web site at:
www.interlogix.com
- Or -
www.utcfssecurityproductspages.eu/videoupgrades
2. Connect the USB device to the recorder.
3. From the menu toolbar, click
The list of files on the USB is displayed.
4. Select the firmware file and click Upgrade. Click
5. When the upgrade process is completed, reboot the recorder. The recorder does
not reboot automatically.
100
Device Management
button. Enter the Admin password, click OK, and then click
button. Enter the Admin password, click OK, and then click
Device Management
>
Configuration
>
Upgrade
Firmware.
Yes
to begin the upgrade process.
TruVision NVR 21 (SP) User Manual
Files.
Yes
to
Yes
to