Interlogix TruVision 21 User Manual page 58

Chapter 9: Display settings
Figure 21: Display Settings window
Table 10: Description of the Display setup window
Option
1. BNC Output Standard
2. Picture Setting
3. BNC Output Brightness
4. VGA Resolution
5. HDMI Resolution
6. Display Status Icons
7. Time bar Transparent
8. Enable Time bar
9. Video Output Interface
52
Description
Define the desired output mode. The BNC output can be used as spot
monitor and also produces the image that is used
Select one of the options from the drop-down list: PAL or NTSC, and
click Apply.
Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright, Soft,
or Vivid, and click Apply.
Define the desired brightness by using the slider.
Define the resolution of the selected monitor.
Select one of the options from the drop-down list and click Apply. The
selected resolution must be the same as that of the monitor.
Define the resolution of the selected monitor.
Select one of the options from the drop-down list and click Apply. The
selected resolution must be the same as that of the monitor.
Define whether the status icons are displayed. Default is Enable.
Select the transparency of the monitor output time bar on screen relative
to the background to make the time bar easier to read.
Check the box to enable/disable. Default is Disable.
Select whether the monitor output time bar appears on screen.
Check the box to enable/disable. Default is Enable.
Select the desired video output interface to apply: VGA/HDMI/BNC.
Default is HDMI.
TruVision NVR 21 (SP) User Manual