Detect Video Loss - Interlogix TruVision 21 User Manual

• Send Email: Sends an email when an alarm or notification is detected. See ""E-mail
settings" on page 77 for information on how to configure the recorder to send an
email.
• Trigger Alarm Output: Triggers an alarm output or multiple alarm outputs when a
notification is detected for an external alarm. See "Types of system alarm
notifications" below for information on configuring an alarm output.
To set up system notifications:
1. From the menu toolbar, click
2. Select a system alarm notification type.
3. Check one or more response method: Display event icon, notification type, enable
alarm audio, notify alarm host, send email, and trigger alarm output.
Note: The list of options available depends on the system alarm selected.
4. Repeat steps 2 and 3 for other system notification types.
5. Click Apply to save the settings.
6. Click Exit to return to live view.
Types of system alarm notifications
The different types of system alarm notifications are:
• HDD Full: All installed HDDs are full and will not record any more video.
• HDD Error: Errors occurred while files were being written to the HDD, there is no
HDD installed, or the HDD had failed to initialize.
• Network Disconnected: Disconnected network cable.
• Duplicate IP Address Found: There is an IP address conflict with another system
on the network.
• Illegal Login: Wrong user ID or password used.
• Input/output Video Standard Mismatch: Indicates a mismatch between camera
settings and camera capabilities. For example, a camera channel set to 1080p while
the recorder does not support that resolution.
• Abnormal Record: HDD cannot record any more files. This could be due to the
overwrite option being disabled so recorded files are locked and cannot be deleted.
• PoE Power Overload: PoE power overload detected.

Detect video loss

Video may be lost if the camera develops a fault, is disconnected, or is damaged. You
can set up the recorder to detect video loss and trigger a system notification.
TruVision NVR 21 (SP) User Manual
Alarm & Event Setup
Chapter 13: Alarm and event setup
> Notification.
93