Table of Contents
Advertisement
Chapter 11: Network settings
UPnP settings
The recorder supports UPnP (Universal Plug and Play). This feature lets the recorder
automatically configure its own port forwarding, if this feature is also enabled in the
router.
You can select one of two methods to set up UPnP:
Automatic mapped type: The recorder automatically uses the free ports available that
were set up in the Network Settings menu.
Manual mapped type: You enter the particular external port settings and IP addresses
required to connect to the desired router (see Figure 24 below).
Figure 24: UPnP auto configuration screen
To enable UPnP:
1. Connect the recorder to the router.
Note: The router must support UPnP and this option must be enabled.
2. From the menu toolbar, click
3. Check the
Enable UPnP
4. From
Mapped Type,
If
Manual
is selected, enter the external ports and IP addresses required. Click the
Edit
icon
to change the values.
5. Click
Apply
to save the settings and click
Network status
You can easily check network traffic in order to obtain information about the recorder
such as its linking status, MAC address, MTU, sending/receiving rate, and NIC type.
84
Network Settings
box.
select Auto or Manual.
>
UPnP.
Exit
to return to live view.
TruVision DVR 12HD User Manual
Advertisement
Table of Contents
