Restricted Access Camera - Interlogix TruVision 21 User Manual

Chapter 10: Camera setup
5. Select the recording schedules for the tamper.
Click Actions and then select the
week and the time periods during the day when motion can be recorded. You can
schedule up to eight time periods in a day. Default is 24 hours.
Click Apply to save the settings. Click
the week and holiday period.
Note: The time periods defined cannot overlap.
6. Select the response method to an external alarm.
Click Actions and then select the
want the recorder to notify you of the alarm: Full-screen monitoring, Enable alarm
audio, Notify alarm host, Send email, and Trigger alarm output. See page 92 for the
list of alarm notification types.
Click Apply to save settings and then
7. Click Exit to return to live view.

Restricted access camera

Restricted access cameras are cameras that are only visible to specific users.
There may be occasions when you want to control who can see a camera image on a
local monitor, such as if there is a camera located in a changing room. The recorder
lets you select which camera (or cameras) is not displayed on the local monitor unless
the user is logged in and has permission to view the camera images. A restricted
access camera is not displayed on screen when no user is logged in. Instead a person
walking by sees a black screen. See Figure 25 below.
Figure 25: Example of a restricted access camera image
66
Arming Schedule
Copy to copy the settings to other days of
Actions tab to select the method by which you
OK to return to the main window.
tab to select the day of the
TruVision NVR 21 (SP) User Manual